重慶升降平臺平時除了保養和維護以外，其實是避免不了老化的，而現在隨著使用升降機的數量不斷的增多，升降平臺會出現一個維修的大潮，下面有關專家就給大家介紹一下升降平臺老化怎么辦？
　　
1、密封圈老化
升降平臺最先老化的部件是密封圈，短則一年，慢則三年就需要更新換代一次，密封圈也稱為油封，是液壓固定式升降平臺必備的配件。如果長時間不使用，密封件就容易出現老化，出現漏油的情況。密封件老化一般是由于周圍的接觸受力不均勻，時間長了就難以恢復，就要及時的更換了。
Ningbo lifting platform is the first part of aging seals, as short as one year, three years, you need to slow the replacement time, also known as ring seals, stationary hydraulic lifting platform necessary accessories. If not using the seal prone to aging, the case of oil spills occur. Seals aging generally due to the contact discontinuity around a long time will be difficult to recover,it is necessary and timely replacement.
　　
2、機件腐蝕
升降平臺長時間放置，也會出現腐蝕、生銹的狀況。特別是一些軸承部位，沒有及時的保養和潤滑，就會讓鋼材氧化，再次使用的時候就會使摩擦加劇，阻力變大，嚴重的時候會造成固定式升降平臺無法使用。所以即使升降平臺不使用，也要經常性的保養潤滑，每個月拉出來升降幾次。
Ningbo lifting platform place a long time, there will be corrosion, rust situation. In particular, some bearing parts, there is no timely maintenance and lubrication, will make steel oxidation,again, when will exacerbate the friction resistance becomes large, severe cases can cause fixed lifting platform can not be used. So even without the use of Ningbo lifting platform, but also regular maintenance lubrication, pull out the lift several times a month.
　　
3、輸油管經常受到壓力的向外作用力，所以在3年左右就會出現裂縫，和滲油的狀況，有時還可能爆管，以及各個軸承，它們負責鏈接和運轉各個部件的轉化體，會承受很大的壓力，也容易老化。
Pipelines are often under pressure outward force, so in about three years there will be cracks, and permeability of the situation, and sometimes may burst pipes, and each bearing, the body that are responsible for the conversion and operation of the various components of the link, it will bear very pressure, but also easy to aging.