重慶升降機滾子鏈傳動的參數選擇主要有鏈的節距和排數、鏈輪齒數、中心距和鏈的節數。

1、節距越大，能傳遞的功率越大，但運動的不均勻性、動載荷、噪聲也相應增大。在滿足承載能力的條件下應盡可能選用小節距的鏈，高速重載時可選用小節距的多排鏈。
Wenzhou lifting platform pitch, the greater the energy transfer of power, but the movement of the unevenness, dynamic load, the noise increases accordingly. In carrying capacity to meet the conditions should be chosen as small pitch chain, the choice of multi-row chain of high-speed heavy-duty small pitch.

2、鏈輪齒數過少會使運動不均勻性加劇，但齒數過多則會因磨損引起的節距伸長導致滾子與鏈輪齒的接觸點向鏈輪齒頂移動易發生跳齒和脫鏈。
Wenzhou lifting platform sprocket teeth too little movement will exacerbate inhomogeneity, but the pitch of teeth due to excessive wear and tear caused by elongation will lead to the point of contact roller and sprocket teeth prone to move to the top of the sprocket tooth jump and off the chain.

3、中心距過小時鏈與小輪嚙合的齒數少，若中心距過大則松邊垂度過大，傳動中容易引起鏈條顫動，一般鏈條節數應為偶數。
Wenzhou lifting platform center distance is too small teeth and small chain wheel engages hours, if the center distance is too large, hanging loose side through the large, easy to cause a chain drive fibrillation, the general number of the chain section should be even.